The 12' standard floor raft is a great boat for fishing trips and up to Class II whitewater. It comes standard with three thwarts for paddle rafting or the thwarts can be removed to make room for a frame and overnight gear for two people. This non-bailing raft features a durable PVC outer shell and urethane bladders for unmatched reliability.

The 15 feet SATURN SD470 is a heavy-duty workboat excellent for any water based activity, such as fishing, day trips or scuba diving. The SD470 is a recent addition to the SATURN line of high performance inflatable boats. New, Limited Edition Special Ops black color SD470 are now available. 15' SATURN SD470 boats are made with premium quality materials, and can handle up to a maximum of 8 persons. SD470 inflatable boats are made of 1,100 Dtex PVC fabric with polyester support has excellent resistance to tearing, tension and breaking. The heavy-duty outer layer, protects the boat against UV rays, ozone and abrasion, and inner layers provides perfect strength and adhesion. Click here to find out more about our PVC fabric. Double layers of fabric at the bottom of the tubes and a rub-strake protector along the keel provide extra protection from sharp rocks and abrasive sand. The safety valve will prevent excessive air pressure in the boat's chambers. 15' SATURN inflatable boats come with a sectional heavy-duty aluminum floor. The bow section is made of a marine grade plywood floor covered with a gray resin.

Same strong construction and features as the Matrix 3 but in a 2 person size. Great for kids that are too small to solo on a tube since they can ride with an adult. Note: Supplied with a repair kit and owner's manual. Warning and instructions printed on product. Quick Release is recommended. Model - U341/ST3842. LOA - 77". Width - 40". Weight - 13 lbs. Pers. Cap. - 2

* Length: 9.0 feet / Beam: 5 feet / Tube diameter: 16.5 inches

* 3 buoyancy tube chambers + V Keel chamber / Air mat chamber / Transom with engine brackets

* Bow bag / Color coordinated, durable rubbing strake (tube and keel) / Over pressure relief

* 1 skid resistant plywood bench seats / life lines with wave prevention design / Front handles

* Keel double layer patch / Tube and seams double PVC layer / 45 degree cones with hard end

* Stainless steel towing rings and front handle / carrying handles and inner handles / One-way drain valve

.

MORE DISCRIPTION

1. Air mat floor is made up of two layers of fabric held together by thousands of polyester cross-stitches; when inflated to high pressure this air cushion becomes as rigid as a traditional floor. Air mat floor is much lighter and takes up less space.

2. Using Korea made 1100 Denier PVC Coated Fabric material brings the best result: perfectly airtight and remarkably durable. PVC material is resistance against cuts, abrasion and climatic aggressions.

3. The inflatable tube and the V-shaped bottom are designed for cutting through the water; boat is light, flexible and only requires smaller outboards. Seamax boat is easy to go and high performance. The large buoyancy tubes which giving a low center of gravity, it gives the inflatable boat more stability. For more info please visit our Website

The Bighorn II carries both a cooler and a dry box, and is designed to fit boats 14-feet and longer. Its size and adjustability enable you to carry all the gear needed for multi-day trips. Like all NRS frames, it breaks down into a small bundle for easy transport, whether by burro, bush plane, or backroad 4-wheeler.

Made of extra heavy, special quality PVC. Has 4 patented Delrin swivel oarlocks and patented motor support chamber. Has the DIN chamber, tunnel chambers. Will accept the stainless steel motor mount for gasoline motors. Note: Boat ratings are USA standards only. Boats are NMMA certified. Comes with a repair kit. Can also accept floorboards and motor mount. Can accept the Boat Boot". Model - U272/XR86GTX-7. LOA - 9'2". Beam - 5'. Weight - 31 lbs. Max. HP - 3.5 HP. Pers. Cap. - 4. Max. Cap.

* Length: 10.5 feet / Beam: 5.0 feet / Tube diameter: 16.5 inches

* 3 buoyancy tube chambers + Keel chamber / Aluminum floor set / Transom with engine brackets

* Bow bag and bag handles / Color coordinated, durable rubbing strake (tube and keel)

* 1 skid resistant plywood bench seat / 2 sets life lines, wave prevention design

* Keel double layer patch / seams double PVC layer / 45 degree cones with hard end

* Stainless steel towing rings and front handle / carrying handles and inner handles / One-way drain valve

.

MORE DISCRIPTIONS

1. With a sharp nose design, Seamax OCEAN comes with aluminum floor and lots of upgrades to provide customer a best value. Aluminum floor is easy to maintain with its exceptional resistance to all types of impact, it is the most favorite type for buyers.

2. Using Korea made 1100 Denier PVC Coated Fabric material brings the best result: perfectly airtight and remarkably durable. PVC material is resistance against cuts, abrasion and climatic aggressions.

3. The inflatable tube and the V-shaped bottom are designed for cutting through the water; boat is light, flexible and only requires smaller outboards. Seamax boat is easy to go and high performance. The large buoyancy tubes which giving a low center of gravity, it gives the inflatable boat more stability. For more info please visit our Website

Whether you're headed to the lake or just hanging out in your own pool, the Sevylor® 7' Sunburst boat is ready for hours of fun! It features quality construction and an all-around grabline, and enough room to comfortably fit up to 3 people.

Giant 7' island for four, with all around grabline and 4 handles. Great for backyard parties. Note: Comes with a repair kit. Model - U452/US404T. Diameter - 84". Weight - 9 1/2 lbs. Features - 4 handles, grabline, boarding access.

Two 3/4-inch thick marine-quality Skidguard seats form the heart of this traditional frame. Joined by two aluminum sides, these textured seats can be drilled for mounting our Action Swivel Seat while retaining plenty of surface area for your tackle box or to make your lunch. The Skidguard Frame is designed for use with smaller rafts such as the Otter, Slalom, Sprite, or Puma.